ABCelectronique : portail d'information dans le domaine de l'électronique
 
 
Numéro de sériePZU10B2L
CategorieDiscrete => Diodes & Rectifiers => Zener Diodes
DescriptionSingle Zener Diodes
General-purpose Zener diodes in SOD882 leadless ultra small Surface-Mounted Device (SMD) plastic package.
SociétéPhilips Semiconductors (Acquired by NXP)
DatasheetTélécharger PZU10B2L datasheet
 
 
  • Description courte

  • General-purpose Zener diodes in SOD882 leadless ultra small Surface-Mounted Device (SMD) plastic package.

    I Non-repetitive peak reverse power dissipation: PZSM W I Total power dissipation: Ptot mW I Tolerance series: B: approximately ±5 B2: approximately % I Wide working voltage range: nominal V (E24 range) I Low reverse current IR range I Small plastic package suitable for surface-mounted design I AEC-Q101 qualified

    Quick reference data Parameter forward voltage non-repetitive peak reverse power dissipation total power dissipation Tamb 25 °C Conditions 100 mA

    Pulse test: tp 300 µs; = 100 µs; square wave; 25 °C prior to surge Reflow soldering is the only recommended soldering method. Device mounted an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint.

    [1] [2] The series consists of 29 types with nominal working voltages from 36 V. The series consists of 25 types with nominal working voltages from 24 V.

    Description leadless ultra small plastic package; 2 terminals; body mm
    Marking codes...continued Marking code HX HY Type number PZU22B2L PZU24B2L Marking code KR -

    Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol IF IZSM Parameter forward current non-repetitive peak reverse current non-repetitive peak reverse power dissipation total power dissipation junction temperature ambient temperature storage temperature

    = 100 µs; square wave; 25 °C prior to surge Reflow soldering is the only recommended soldering method. Device mounted an FR4 PCB, single-sided copper, tin-plated and standard footprint. Device mounted an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm2.