ABCelectronique : portail d'information dans le domaine de l'électronique
 
 
Numéro de sérieNJM2516
CategorieMultimedia => Video => Filters
Description47µF AC-Coupling Capacitor Wide Band 3ch Video Driver With LPF
The NJM2516 is 3ch video amplifier with LPF for the high definition signal.The NJRC original Technology ?ASC(Advanced SAG Correction)?realizes 47µF AC-Coupling Capacitor which enables to downsize mounting space.No worrying about beat noise caused by charge-pump circuit, and over-current caused by circuit short out than Capacitor-less video driver.The NJM2516 is suitable for the Video system to the high definition signal output.
SociétéNJR Corporation
DatasheetTélécharger NJM2516 datasheet
 
 
  • Description courte
  • 47µF AC-Coupling Capacitor Wide Band 3ch Video Driver with LPF

    sGENERAL DESCRIPTION The is 3ch video amplifier with LPF for the high definition signal. The NJRC original Technology "ASC(Advanced SAG Correction)" realizes 47µF AC-Coupling Capacitor which enables to downsize mounting space. No worrying about beat noise caused by charge-pump circuit, and over-current caused by circuit short out than Capacitor-less video driver. The NJM2516 is suitable for the Video system to the high definition signal output. sFEATURES q Operating Voltage 9.5V q AC-Coupling Capacitor 47µF q Input Signal Y,Pb,Pr q Internal 6dB Amplifier q Internal 75 Driver q Internal LPF SW q Internal Power Save Circuit q Bipolar Technology q Package Outline SSOP20-C3 sBLOCK DIAGRAM sPACKAGE OUTLINE

    sABSOLUTE MAXIMUM RATINGS(Ta=25°C) PARAMETER SYMBOL + Supply Voltage V Power Dissipation PD Operating Temperature Range Topr Storage Temperature Range Tstg RATINGS to +150 UNIT mW °C

    on a board of EIA/JEDEC specification. 1.6mm, 4 layers, FR-4) sRECCOMENDED OPERATING CONDITIONS(Ta=25°C) PARAMETER Operating voltage SYMBOL Vopr

    sELECTRICAL CHRACTERISTCS =5V, RL=150,Ta=25°C) PARAMETER Supply Current Supply Current at Power Save Mode Maximum Output Level Voltage Gain Difference of Voltage Gain Between Input Terminals LPF Characteristics 1 SYMBOL ICC Isave Vom Gv GvI DP SN VthH VthL IthH IthL No signal Power save mode, No signal Vin=1MHz, 1.0Vp-p sin-signal Vin=1MHz, 1.0Vp-p sin-signal Vin=13.5MHz/1MHz,1.0Vp-p sin-signal Vin=54MHz/1MHz,1.0Vp-p sin-signal Vin=30MHz/1MHz,1.0Vp-p sin-signal Vin=74MHz/1MHz,1.0Vp-p sin-signal PBIN,PRIN=0.7Vp-p, 10step video signal PBIN,PRIN=0.7Vp-p, 10step video signal YIN=1.0Vp-p, PBIN,PRIN=0.7Vp-p, white video signal, to 6MHz,RL=75 Active Non-Active 2.5 0 TEST CONDITION MIN. TYP. V

    LPF Characteristics 2 Differential Gain Differential Phase S/N Ratio SW Voltage High Level SW Voltage Low Level SW Sink Current High Level SW Sink Current Low Level

    sCONTROL CHRACTERISTC PARAMETER STATUS H Power Save L OPEN H LPF L OPEN Power save: OFF Power save: ON Power save: ON 30MHz LPF 13.5MHz LPF 13.5MHz LPF MODE Active mode Non-Active mode (Mute) Non-Active mode (Mute)

    1. YIN 2. PBIN 3. PRIN 4. SREFPB 5. PBSAG 6. SSIGPB GND1 8. SREFPR 9. PRSAG 10. SSIGPR