ABCelectronique : portail d'information dans le domaine de l'électronique
 
 
Numéro de sérieNJM2512
CategorieMultimedia => Video => Filters
Description47µF AC-Coupling Capacitor Low Voltage Video Driver With LPF
The NJM2512 is a Low Voltage Video Amplifier featuring small AC-coupling Capacitor.The NJRC original Technology ?ASC(Advanced SAG Correction)?realizes 47µF AC-Coupling Capacitor which enables to downsize mounting space.No worrying about beat noise caused by charge-pump circuit, and over-current caused by circuit short out than Capacitor-less video driver.The NJM2512 is suitable for any video application.
SociétéNJR Corporation
DatasheetTélécharger NJM2512 datasheet
 
 
  • Description courte
  • 47µF AC-Coupling Capacitor Low Voltage Video Driver with LPF

    sGENERAL DESCRIPTION The is a Low Voltage Video Amplifier featuring small AC-coupling Capacitor. The NJRC original Technology "ASC(Advanced SAG Correction)" realizes 47µF AC-Coupling Capacitor which enables to downsize mounting space. No worrying about beat noise caused by charge-pump circuit, and over-current caused by circuit short out than Capacitor-less video driver. The NJM2512 is suitable for any video application. sFEATURES q Operating Voltage q AC-Coupling capacitor q 6dB Amplifier q 75 Driver q Internal LPF q Power-save Circuit q Bipolar Technology q Package Outline sPACKAGE OUTLINE

    1: SSIGV 2: VSAG 3: SREFV 4: VIN 5: GND 6: Power Save 7: VOUT 8: V

    sABSOLUTE MAXIMUM RATINGS (Ta=25°C) PARAMETER Supply Voltage Power Dissipation Operating Temperature Range Storage Temperature Range SYMBOL V

    on a board of EIA/JEDEC specification. x 1.6mm Two layers, FR-4) sRECCOMENDED OPERATING CONDITIONS (Ta=25°C) PARAMETER Operating voltage SYMBOL Vopr

    sELECTRICAL CHRACTERISTCS( =5V, RL=150,Ta=25°C) PARAMETER Supply Current Supply Current at Power Save Mode Maximum Output Level Voltage Gain Low Pass Filter Characteristic Differential Gain Differential Phase S/N Ratio SW Voltage High Level SW Voltage Low Level SW Sink Current High Level SW Sink Current Low Level s CONTROL TERMINAL PARAMETER Power Save STATUS H L OPEN Power save: OFF Power save: ON Power save: OFF MODE Active mode Non-Active mode (Mute) Non-Active mode (Mute) SYMBOL ICC Isave Vom DP SN VthH VthL IthH IthL No signal Power save mode Vin=1MHz, 1.0Vp-p sin-signal Vin=4.5MHz/1MHz, 1.0Vpp sin-signal Vin=19MHz/1MHz, 1.0Vpp sin-signal Vin=1.0Vp-p 10step video signal Vin=1.0Vp-p 10step video signal Vin=1.0Vp-p 100% White Video Signal, RL=75 Active Non-Active V=5V V=0.3V TEST CONDITION MIN. TYP. 10 MAX. 15 UNIT mA


    [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights.